The steel mould of the anti-collision wall is an important tool used to make the anti-collision wall. The produced anti-collision wall is not only strong and durable, but also the wall of the anti-collision wall is compact, with great bearing capacity and smooth surface. Generally, it takes only 2 to 4 days to make the anti-collision wall with the anti-collision wall mould. If the weather is good, the solidification time will not be too long, Because the weather conditions are different, the solidification time is also different, its use method is also very simple, and the assembly and disassembly are very convenient, so the workers will operate very handy, and the handling is also very easy. Generally, two or three workers can move it, which brings a lot of convenience to the constructors and can effectively complete the work within the construction period
The production process of anti-collision wall steel mould is mainly based on the demand for concrete anti-collision wall, because the production of anti-collision wall mould depends on the demand for highway. With the increasingly strict requirements for the production of concrete anti-collision wall by highway, more and more attention is paid to the production process of anti-collision wall formwork, especially the anti-collision wall steel mould currently used, Whether it is material or manual welding, there are relevant production processes. The main form of high-speed anti-collision wall steel mold process is to rely on the subdivision of design drawings, because the anti-collision wall mold has different design drawings in different provinces and highway construction, especially the design of the top of the anti-collision wall. Some require ears to connect lines or other signs, but some are directly set as flat, Arranged together as a whole.
In terms of the characteristics of the steel mold of the anti-collision wall, more people often use the length of 1m to connect together, because the combined weight of the two pieces is generally about 70cm, and they can be transported manually alone, which saves a lot of energy and can be put into the cast-in-situ work of the concrete anti-collision wall faster. The constructors who deal with this formwork all year round will set up two pull rods up and down, especially on the top, two pull rods can be set, which can reduce the impact force of concrete. The steel mold of high-speed anti-collision wall needs to bear large conformity and impact during operation. In order to prevent fracture and slurry leakage, we will consider the steel when selecting materials, because high temperature will occur in the processing process. The mold needs to ensure that it will not deform under this working environment to avoid molding failure. The high-speed anti-collision wall mold has strong toughness and corrosion resistance, and can work in a harsh environment to ensure accuracy and stability when this program occurs.