The steel formwork of anti-collision wall is widely used all over the country, especially in road projects in the north. It is suitable for all kinds of cast-in-situ reinforced concrete projects. The large formwork of anti-collision wall can be assembled in advance according to the design requirements and hoisted in place as a whole. The bulk disassembly method can also be adopted, which is more convenient: convenient construction, strong universality, easy assembly and many turnover times.
產品優點: 1、鋼模板表面平整光澤。 2、靈活性高，拼接簡單，易組裝。 3、工藝要求，嚴中求嚴，精益求精。鋼模板分類：根據鋼模板的用途可分為：民建（房建）鋼模板、橋梁鋼模板。根據鋼模板澆筑的外形可分為：箱梁模板、T型梁模板、蓋梁模板、空心梁模板、圓模板、護梁模板、墩柱頭模板等。還有一種組合式鋼模板分為：大模板、小模板、中模板、陰角、陽角等。
Product advantages: 1. The surface of steel formwork is flat and glossy. 2. High flexibility, simple splicing and easy assembly. 3. Process requirements, strict in strict, keep improving. Classification of steel formwork: according to the purpose of steel formwork, it can be divided into civil construction (housing construction) steel formwork and bridge steel formwork. According to the shape of steel formwork pouring, it can be divided into box girder formwork, T-beam formwork, bent cap formwork, hollow beam formwork, circular formwork, guard beam formwork, pier column head formwork, etc. There is also a combined steel formwork, which is divided into large formwork, small formwork, medium formwork, internal corner, external corner, etc.
The steel formwork of the anti-collision wall is a cast-in-place concrete part, which is often an important part of many bridges and expressways. The pouring and production of the retaining wall is actually very convenient, and the retaining wall will not move. The molds are spliced at a fixed position, which can be directly integrated with the bridge body after pouring mud in the middle, Cast in situ construction: retaining wall and anti-collision wall are a kind of construction structure. In fact, to some extent, retaining wall is anti-collision wall, so the construction methods, including molds, are similar. Retaining wall molds are now cast-in-situ construction, and the pouring standard of retaining wall is no less than other protective measures, such as the firmness of bridge body, so as to standardize the construction of bridge body. The normal construction of the retaining wall mold should be to fix the reinforcement at the pouring position in advance, and the reinforcement should be connected with the bridge body as much as possible, so that the molds on both sides of the reinforcement can be assembled and spliced,